SEARCHGO
Phillystran 9

Ropes & Strength Members for Marine, Industrial & Military Applications

151 Commerce Drive
Montgomeryville, PA 18936-9628 

Call us at 
+1 (215) 368-6611
or send an email to information@phillystran.com

Phillystran® 7 x 19 Working Ropes - Technora® (Aramid) Rope

Phillystran® 7 x 19 Working Ropes - Technora® (Aramid) Rope

Phillystran high tenacity Technora® aramid fiber ropes (PST) have been engineered for applications where lightweight, high strength and good abrasion resistance are important. Phillystran PST ropes are general purpose working ropes manufactured in a 7 strand construction with an overall braided polyester jacket. Typical applications where PST ropes should be considered are winch lines, mooring lines and towing lines.


Part Number Break Strength Diameter Weight
lbs kN in mm lbs/1,000 ft kg/km
PST 005 1,500 6.7 1/8 3.2 8 12
PST 008 4,000 18 3/16 4.8 19 28
PST 010 7,700 34 1/4 6.4 38 57
PST 020 15,000 67 3/8 10 56 83
PST 030 23,000 102 7/16 11 80 120
PST 040 28,000 125 1/2 13 100 150
PST 050 44,000 196 5/8 16 150 220
PST 060 63,000 280 3/4 19 200 300
PST 080 110,000 489 1 25 350 520
PST 145 145,000 645 1-1/8 29 445 660
PST 165 165,000 734 1-1/4 32 495 740
PST 210 210,000 934 1-1/2 38 615 920
PST 255 255,000 1,134 1-5/8 41 730 1,090
PST 310 310,000 1,379 1-3/4 44 855 1,270
PST 355 355,000 1,579 1-7/8 48 1,000 1,490
PST 470 470,000 2,091 2-1/8 54 1,300 1,930
PST 590 590,000 2,624 2-1/2 64 1,800 2,680
PST 710 710,000 3,158 2-3/4 70 2,150 3,200
PST 830 830,000 3,692 3 76 2,550 3,790
PST 945 945,000 4,203 3-1/4 83 3,000 4,460
PST 1065 1,065,000 4/737 3-1/2 89 3,500 5,210
PST 1180 1,180,000 5,250 3-5/8 92 4,000 5,950


Weights and Dimensions can vary

Technora® is a Registered Trademark of Teijin, LTD

CAUTION: Break Strength: The breaking strength of a rope is the load at which a new rope will break when tested under laboratory conditions. Break strength should not be mistaken for safe working load. Safe Working Load: Because of the wide range of rope use, rope condition and the degree of risk of life or property, it is not possible to make a blanket recommendation for safe working load. It is ultimately dependent on the rope user to determine what percentage of break strength is their own safe working load. Wear: Ropes wear out with use; the more severe the usage, the greater the wear. It is often not possible to detect wear on a rope by visible signs alone. Therefore, it is recommended that the rope user determine a retirement criteria for ropes in their application. For assistance in developing safe working load and retirement criteria for each application please call or write Phillystran, Inc. 

All printed statements, data and recommendations are based on reliable information and tests, and are presented without any guarantee or warranty. Statements regarding the use of Phillystran, Inc.'s products and processes are not to be construed as recommendations for use in violation of any applicable laws, regulations or patent rights. © All rights reserved.



Phillystran manufactures high tenacity fiber ropes, strands, braids and strength members from fibers such as Kevlar®, Twaron®, Technora®, Vectran®, Dyneema® and Zylon®. Phillystran also manufactures polyester ropes for specialized applications. Phillystran products are used worldwide in a broad range of marine, industrial and military rope applications including mooring lines, life lines and winch lines, boat rigging, structural and support lines, power cables and broadcast tower guy cables.