SEARCHGO
Phillystran 9

Ropes & Strength Members for Marine, Industrial & Military Applications

151 Commerce Drive
Montgomeryville, PA 18936-9628 

Call us at 
+1 (215) 368-6611
or send an email to information@phillystran.com

Phillystran® PSPE 7 x 19 Working Ropes - Spectra® / Dyneema® (High Modulus Polyethylene) Rope

Phillystran® PSPE 7 x 19 Working Ropes - Spectra® / Dyneema® (High Modulus Polyethylene) Rope

Phillystran high modulus polyethylene fiber ropes (PSPE) have been engineered for applications where lightweight, high strength and good abrasion resistance is important. Phillystran PSPE ropes are general purpose working ropes manufactured in a 7x19 construction with an overall braided polyester jacket. Typical applications where PSPE ropes should be considered are winch lines, mooring lines and towing lines.

 

Part Number Break Strength Diameter Weight
lbs kN in mm lbs/1,000 ft kg/km
PSPE 005 1,500 6.7 1/8 3.2 7 10
PSPE 008 4,000 18 3/16 4.8 17 25
PSPE 010 7,700 34 1/4 6.4 35 52
PSPE 020 15,000 67 3/8 10 50 74
PSPE 030 23,000 102 7/16 11 70 100
PSPE 040 28,000 125 1/2 13 85 130
PSPE 050 44,000 196 5/8 16 130 190
PSPE 060 63,000 280 3/4 19 170 250
PSPE 080 110,000 489 1 25 300 450
PSPE 145 145,000 645 1-1/8 29 380 570
PSPE 165 165,000 734 1-1/4 32 420 630
PSPE 210 210,000 934 1-1/2 38 520 770
PSPE 255 255,000 1,134 1-5/8 41 610 910
PSPE 310 310,000 1,379 1-3/4 44 710 1,060
PSPE 355 355,000 1,579 1-7/8 48 850 1,260
PSPE 470 470,000 2,091 2-1/8 54 1,090 1,620
PSPE 590 590,000 2,624 2-1/2 64 1,510 2,250
PSPE 710 710,000 3,158 2-3/4 70 1,800 2,680
PSPE 830 830,000 3,692 3 76 2,100 3,130
PSPE 945 945,000 4,203 3-1/4 83 2,500 3.720
PSPE 1060 1,065,000 4.737 3-1/2 89 2,950 4,390
PSPE 1180 1,180,000 5,250 3-5/8 92 3,300 4,910

 

  • Weights and Dimensions can vary
  • Spectra® is a Registered Trademark of Honeywell
  • Dyneema® is a Registered Trademark of DSM B.V.

 

CAUTION:  Break Strength: The breaking strength of a rope is the load at which a new rope will break when tested under laboratory conditions. Break strength should not be mistaken for safe working load. Safe Working Load: Because of the wide range of rope use, rope condition and the degree of risk of life or property, it is not possible to make a blanket recommendation for safe working load. It is ultimately dependent on the rope user to determine what percentage of break strength is their own safe working load. Wear: Ropes wear out with use; the more severe the usage, the greater the wear. It is often not possible to detect wear on a rope by visible signs alone. Therefore, it is recommended that the rope user determine a retirement criteria for ropes in their application. For assistance in developing safe working load and retirement criteria for each application please call or write Phillystran, Inc. 

All printed statements, data and recommendations are based on reliable information and tests, and are presented without any guarantee or warranty. Statements regarding the use of Phillystran, Inc.'s products and processes are not to be construed as recommendations for use in violation of any applicable laws, regulations or patent rights. © All rights reserved.



Phillystran manufactures high tenacity fiber ropes, strands, braids and strength members from fibers such as Kevlar®, Twaron®, Technora®, Vectran®, Dyneema® and Zylon®. Phillystran also manufactures polyester ropes for specialized applications. Phillystran products are used worldwide in a broad range of marine, industrial and military rope applications including mooring lines, life lines and winch lines, boat rigging, structural and support lines, power cables and broadcast tower guy cables.