 |
PART
NUMBER |
EYE LENGTH |
MBS |
SWL 1:5 |
LENGTH OF LEGS |
COLOR CODING |
CABLE DIAMETER |
| |
|
|
|
|
|
MINIMUM |
MAXIMUM |
| |
IN |
CM |
LBS |
kN |
LBS |
kN |
FT |
M |
EYE+LEG |
IN |
mm |
IN |
mm |
|
| PSG 25 |
6 |
15 |
5,620 |
25 |
1,124 |
5 |
4 |
1.25 |
purple |
3/16 |
4 |
3/8 |
8 |
 |
| PSG 50 |
6 |
15 |
11,240 |
50 |
2,248 |
10 |
5 |
1.5 |
orange |
1/4 |
6 |
5/8 |
16 |
|
| PSG 75 |
8 |
20 |
16,860 |
75 |
3,372 |
15 |
6.5 |
2.0 |
red |
3/8 |
9 |
3/4 |
19 |
|
| PSG 125 |
10 |
25 |
28,100 |
125 |
5,620 |
25 |
8 |
2.5 |
green |
7/16 |
11 |
1 |
25 |
|
| PSG 250 |
12 |
30 |
56,200 |
250 |
11,240 |
50 |
15 |
4.25 |
black |
5/8 |
16 |
1-3/4 |
44 |
|
| PSG 350 |
14 |
35 |
84,300 |
350 |
16,860 |
75 |
16.5 |
5.0 |
blue |
7/8 |
22 |
2-1/2 |
63 |
|
| PSG 500 |
18 |
45 |
112,400 |
500 |
22,480 |
100 |
23.0 |
7.0 |
yellow |
1 |
25 |
3-1/2 |
89 |
|
|
| All grips can be provided with a soft or thimble end. Odd sizes can be supplied upon request. |
- PhillyGrips are 100% synthetic and care should be taken using the grips on rusty and rough surfaces. This can damage or cut the synthetic legs and reduce holding power and/or life expectancy of the grip.
- PhillyGrips can be installed on a variety of cables, all with different friction coefficients. Although the breaking load of the grip is certified, care should be taken by assuming a certain holding power. Please contact Phillystran, Inc. for more details.
- PhillyGrips are proof loaded at 2 times SWL.
- PhillyGrips can be supplied with Lloyds Register of Shipping and Bureau Veritas certificates.
- Leg ends are color coated
|
CAUTION: Break Strength: The breaking strength of a rope is the load at which a new rope will break when tested under laboratory conditions. Break strength should not be mistaken for safe working load. Safe Working Load: Because of the wide range of rope use, rope condition and the degree of risk of life or property, it is not possible to make a blanket recommendation for safe working load. It is ultimately dependent on the rope user to determine what percentage of break strength is their own safe working load. Wear: Ropes wear out with use; the more severe the usage, the greater the wear. It is often not possible to detect wear on a rope by visible signs alone. Therefore, it is recommended that the rope user determine a retirement criteria for ropes in their application. For assistance in developing safe working load and retirement criteria for each application please call or write Phillystran, Inc.
All printed statements, data and recommendations are based on reliable information and tests, and are presented without any guarantee or warranty. Statements regarding the use of Phillystran, Inc.'s products and processes are not to be construed as recommendations for use in violation of any applicable laws, regulations or patent rights. © All rights reserved. |
|
